Precision components / Crank pin

Pin Stroke Honda LEAD 125

Pin stroke eksentrik untuk perbaikan kruk as dan modifikasi mesin stroke up. Produksi custom berdasarkan gambar teknis atau sampel.

Eccentric offset
2 mm / 3 mm
Crank pin diameter
30 mm
Crank pin length
44.3 mm
Minimum order 300 pcsRequest a Quote

Intended application: Honda LEAD 125 4V eSP+. Fitment subject to verification.

At a glance

Key specifications

Supplier-provided specifications. Not independent measurements.

Eccentric offset2 mm / 3 mm
Crank pin diameter30 mm
Crank pin length44.3 mm
Theoretical stroke increase+4 mm / +6 mmFor 2 mm / 3 mm offset respectively; not measured installation results.

Engineering data

Technical specifications

Offset is not final engine stroke. Verify the complete assembly before ordering.

Dimensions & geometry

Crank pin diameter
30 mm
Crank pin length
44.3 mm
Eccentric offset
2 mm / 3 mm
Theoretical stroke increase: 2 mm offset
+4 mm; theoretical design increment, not a measured installation result
Theoretical stroke increase: 3 mm offset
+6 mm; theoretical design increment, not a measured installation result

Application & supply

Product name
Honda LEAD 125 Crankshaft Pin
Product type
Eccentric Crank Pin
Intended engine application
Honda LEAD 125 4V eSP+ (corresponding versions from 2022)
Available forms
Crank Pin Only / Crank Pin with Needle Roller Bearing Set; bearing dimensions and selected supply configuration require confirmationCustomizable
Applications
Crankshaft Repair / Stroker Engine Modification
MOQ
300 pcs
OEM / Custom
Custom manufacturing based on drawings or samples
Specification source & technical context

Pin stroke eksentrik untuk proyek perbaikan kruk as dan modifikasi mesin stroke up. Spesifikasi yang dinyatakan pemasok: diameter 30 mm, panjang 44.3 mm dan pilihan offset eksentrik 2 mm / 3 mm; MOQ 300 pcs. Aplikasi produk disediakan oleh Ruizheng Racing untuk versi mesin yang ditentukan.

Product details

A closer look

Honda LEAD 125 eccentric crank pin straight side profile

Crank pin geometry

Straight side profile showing the stepped geometry; dimensions are supplied separately.

Photos are product references, not dimensional inspection evidence.

Application review

Applications & fitment

Aplikasi produk disediakan oleh Ruizheng Racing untuk versi mesin yang tercantum di bawah ini.

No confirmed interchangeable applicationsAll models below are candidates only. Shared eSP+ branding does not establish compatibility.
Required compatibility checks

Aplikasi yang disediakan pemasok: Honda LEAD 125 — versi 4V eSP+ yang sesuai mulai 2022; Honda PCX160 — 4V eSP+; Honda ADV160 — 4V eSP+; Honda CLICK160 — 4V eSP+; Honda VARIO160 — 4V eSP+; Honda AIR BLADE160 — 4V eSP+; Honda Giorno+ 125 — 4V eSP+; Honda PCX125 — 4V eSP+; Honda FORZA125 — versi yang sesuai mulai 2021; Honda SH125i / SH150i — versi 4V eSP+ yang sesuai

OEM / Customization

Built around your drawing or sample.

Share your required offset, supply configuration, application and dimensional tolerances for quotation.

Customization scope & limitations

Manufaktur custom berdasarkan gambar atau sampel pelanggan tersedia sesuai informasi produk yang diberikan. Konfirmasikan offset eksentrik, konfigurasi pasokan, toleransi dimensi, dan persyaratan aplikasi sebelum penawaran harga. Tidak ada klaim mengenai material, kekerasan, sertifikasi, kemasan, atau kemampuan desain ODM independen khusus produk.

Explore related components

Related projects, not evidence of pin interchangeability.

Before you order

Frequently asked questions

Apakah 2 mm / 3 mm berarti langkah akhir mesin?

Tidak. Nilai tersebut adalah offset eksentrik. Nilai +4 mm / +6 mm yang sesuai adalah peningkatan langkah teoritis untuk desain offset yang ditentukan, bukan langkah total akhir atau hasil pengukuran yang dijamin untuk setiap mesin. Langkah akhir, orientasi offset, jarak bebas, dan keseluruhan rakitan harus diverifikasi untuk rakitan yang sebenarnya.

Aplikasi sepeda motor apa saja yang tercantum untuk pin stroke ini?

Bagian Applications & Fitment mencantumkan 10 kelompok aplikasi yang disediakan oleh Ruizheng Racing, beserta versi mesin dan batas tahun yang ditentukan. Lihat daftar tersebut saat mengidentifikasi mesin Anda; daftar ini tidak mencakup setiap versi dari masing-masing model.

Apakah needle roller bearing termasuk?

Bentuk yang tersedia adalah Crank Pin Only atau Crank Pin with Needle Roller Bearing Set. Foto yang disediakan hanya menunjukkan pin telanjang. Tentukan bentuk yang diperlukan untuk penawaran harga; dimensi bearing, spesifikasi, dan kelengkapan harus dikonfirmasi sebelum memesan.

Berapa jumlah pesanan minimum?

MOQ yang dinyatakan adalah 300 pcs.

Apa yang harus saya sediakan untuk penawaran harga?

Sebutkan Honda LEAD 125 Crankshaft Pin, pilih offset eksentrik 2 mm atau 3 mm, pilih pin saja atau pin dengan needle roller bearing set, dan berikan jumlah (MOQ 300 pcs), model, tahun, pasar, kode mesin, dan gambar atau sampel. Masukkan offset secara manual pada kolom persyaratan RFQ saat ini.

Apakah pin stroke ini dapat dicustom?

Manufaktur custom berdasarkan gambar atau sampel pelanggan tersedia sesuai informasi produk yang diberikan. Konfirmasikan offset eksentrik, konfigurasi pasokan, toleransi dimensi, dan persyaratan aplikasi sebelum penawaran harga.

Start your specification review

Tell us about your build.

Specify 2 mm or 3 mm offset, pin only or bearing set, and your engine reference. MOQ: 300 pcs.

Request a QuoteEnter your selected offset in the RFQ requirements field.